Free Shipping
Ships Today
VOOPOO Drag Mini 117W TC Box Mod is right here to serve you! Powered by an inbuilt 4400mAh battery, Drag Mini Mod supports a powerful output of 117W. ..
Free Shipping
Ships Today
Easy
Returns
Lowest Price
Guarantee
VOOPOO Drag Mini 117W TC Box Mod is right here to serve you!
Powered by an inbuilt 4400mAh battery, Drag Mini Mod supports a powerful output of 117W.
As a new generation of VOOPOO Drag, the Drag Mini is slimmer and lighter than its predecessor with attractive colors.
The VOOPOO Drag Mini Mod adopts GENE. The FIT chip brings both security and convenience to vapers. FIT is a mode that can protect tanks the most with its intelligent matches of FIT 1/2/3.
Just get the VOOPOO Drag Mini Mod and enjoy an out-of-this-world vape.
Parameters
Dimensions: 81.5 x 48.5 x 25.5mm
Battery: Built-in 4400mAh
Power Range: 5-117W
Resistance range: 0.05-5.0ohm
Temperature Range:200-600℉/100-315℃
Innovative Mode: FIT Mode
Output Current: 0-30A
Output Voltage Range:0-7.5V
Upgraded Function: Yes
Material: Zinc Alloy & Resin
Thread: 510 thread
Packaging Specification: 1pc/pack(package size: 120 x 76 x 41mm, weight: 300g); 50pcs/carton(carton size: 415 x 260 x 245mm, weight: 15.5kg)
Come with FIT mode and can protect tanks to the most with its intelligent matches of FIT 1/2/3.
GENE.FIT chip fits your security to protect tanks from burnout
Besides the innovation at its core, GEN.FIT chip is secured by a V10 class fireproofing bridge to block dust, e-liquid, or burnout.
4400mAh built-in battery
With the equivalent power of 2 18650 batteries, DRAG mini is almost twice as strong in battery lifespan compared with similar devices.
Eight security protections
1. Battery reverse protection
With battery reverse protection, the mod will be protected from breakdown.
2. Switch timeout protection
Intelligent overtime protection will avoid atomizer coil and cotton burning.
3. Over-temperature protection
TC mode assures the mod and battery work properly within a safe temperature range.
4. Output over-current protection
To intelligently detect output current, and close the output current when the current exceeds the highest limit.
5. Overcharge protection
With dedicated lithium battery protection components, the battery will be protected against battery overcharge and damage.
6. Over-discharge protection
With dedicated lithium battery protection components, the battery will be protected against battery discharge and harm.
7. Short-circuit protection
When the short circuit is detected, the mod will protect the battery by preventing the circuit from returning.
8. Support balance charge with different brand batteries.
With dedicated firmware to detect the internal resistance of the battery, the battery will be controlled in a steady balanced charging condition.
Upgraded firmware
What the package box includes:
Standard Edition
TPD Edition
Simple packing. Customary Packing from the factory, the packing is subject to change without notice.
Order Tips:
510 thread
Operation Guide:
Power on/off: Press the fire button 5 times in quick succession to turn the device on and off.
Mode Switch: Press the fire button 3 times quickly, and the four interfaces can be switched in an orderly under normal startup conditions. Constant power and temperature control of SS/Ni/Ti.
Temperature Adjustment: When the temperature was set to 100℃, keep on pressing the down button, and the temperature will turn to 600F. When the temperature was set to 200F, keep on pressing the down button, and the temperature will turn to 315℃. Quickly press the fire button 4 times can get into the wattage adjust interface. Then you will see the letter "W" flashing. The adjustable wattage is 5W to 80W.
Function Menu: Press the up and down buttons simultaneously for 1.5 seconds, and enter the function menu interface. Press the up button or down button simultaneously to choose the function. Press the fire button to make a confirmation and go to the next step.
Customization Mode: Press the up and down buttons simultaneously for 1.5 seconds, and the device will go to the function menu interface. Press the up and down buttons to choose the Customization Mode and press the fire button to go into the Customization Mode interface. Under Customization Mode, press the fire button 3 times continuously, 4 kinds of Customization Mode can be switched sequentially: Stable Power Mode, Temperature Control Mode: TC-SS316/TC-Ni200/TC-Ti.
Sleep Mode: If there is no operation for 30 seconds, the screen will turn off. No operation for 30 minutes after the screen is off, the device will enter sleep mode.
Guarantee
Please check the guarantee policy.
Payment
About warranty:
Shipping from China
Feedback
Please contact us first before you leave a review, we will help you to deal with your problem In time