Just as its name, the SMOK RPM Lite Pod System Starter Kit is a lite version of the RPM40.
With a slim size and portable design, the SMOK RPM Lite is powered by an inbuilt 1250mAh battery.
The SMOK RPM Lite Kit is wattage-adjustable from 1W to 40W. The SMOK RPM Lite adopts the IQ-R chip, providing a stable and easy-to-operate vaping experience to the vapers.
The SMOK RPM Lite Pod features a replaceable coil system and a 3.2ml/2ml juice capacity.
The kit includes two RPM coils: RPM Mesh 0.4Ω and RPM DC 0.8Ω MTL, which are designed for the best flavor and excellent vapor production.
Parameters:
Battery Capacity: 1250mAh
Size: 21 x 32 x 75mm
Standby Current: <140uA
Input Voltage: 3.3V-4.2V
Output Voltage: 0.5V-4.0V
Charging Voltage: 5V
Output wattage: 1W-40W
Charging Current: 1.2A (Max)
Output Mode: Watt
Resistance Range: 0.3Ω-2.0Ω
Overcharge Voltage: 4.3V
Over-discharge Voltage: 2.4V
Overcharge Current: 2.0A
Lightweight And Simplified
1250mAh Battery Capacity can ensure enough running time and help you enjoy vaping for a longer time.
Max Output Power-40W.
0.96-inch Tft Screen presents detailed vaping data including the wattage, resistance, voltage, screen color, puff number, and battery level.
3.2/2.0ml Large E-Liquid Capacity.
The RPM Mesh 0.4Ω Coil and RPM DC 0.8Ω MTL Coil are made for pure flavor. The DC 0.8Ω MTL coil comes with dual coils with a larger heating area and faster heating speed, and its 2.0mm hole offers excellent wicking capability to bring superb flavor.
RPM RBA Coil is specially designed by SMOK engineers to help you find your vaping style. In addition, the package contains a screwdriver that makes it easy and convenient to rebuild the coil.
Widely compatible with RPM40 coil
RPM coils introduction
1. RPM Mesh 0.4Ω coil（kit includes）
For best flavor
Fast heating process
Wattage：25w
2.RPM trip 0.6Ω coil（optional）
Fast ramp-up time
Excellent flavor & vapor production
Wattage：25w
3.RPM quartz 1.2Ω coil（optional）
Purer flavor
Fast heating process
Wattage：25w
4.RPM SC 1.0Ω coil（optional）
Single 1.0Ω coil
Wattage：14w（best）
5. RPM RBA coil（optional）
0.6Ω coil
Enjoy DIY pleasure
Wattage：14w（best）
The RPM RBA coil supports coils with a minimum resistance of 0.25Ω
6.RPM MTL 0.3Ω coil（optional）
0.3Ω coil
Mouth to Lung
Wattage：10W~15W（best）
7.RPM DC 0.8Ω MTL coil（optional）
0.8Ω coil
Dual coils for Mouth to Lung vaping
Larger area and faster heating
2mm inner hole for excellent wicking
wattage：16W
How to build the SMOK RBA coils?
1. Before starting, make sure your hands are clean
2. Take the RBA deck apart.
3. Installing and positioning the pre-wrapped coils. Place the coil between the posts and wrap the ends around the screws and tighten up, once all in place make sure the coil is fixed in the center and lined up with the air hole, and also make sure the coil is not touching the base.
4. Cutting off the ends of the wire.
5. Install the 510 adapters on the RBA deck and activate the device to test the coil. if the coil is not heated evenly from the center outwards, adjustments are required.
6. Cut a strip of cotton and make sure it's neither too much nor too little.
7. Insert the cotton, and place it in the middle.
8. Cut the cotton at an angle and make sure it is neither too short nor too long.
9. Wet the coil with your e-liquid and adjust the cotton.
Warning: Coils must be checked for resistance before they are fired on a device and re-checked periodically to ensure the resistance remains the same.
How to refill with vape juice?
1. Pull out the pod；
2. Pull out the rubber plug on the slot and refill e-liquid through the slot；
3. Press the rubber plug back carefully and firmly.
Multiple Protections include high-temperature protection, short circuit protection, 8-second cut-off, and low voltage protection.
The package includes:
3.2ml Standard Edition/3.2ml EU Standard Edition/3.2ml US Edition/3.2ml Canada Edition
- 1 x RPM Lite Device (1250mAh)
- 1 x RPM Lite Empty RPM Pod (3.2ml)
- 1 x RPM Mesh 0.4Ω Coil
- 1 x RPM DC 0.8Ω MTL Coil
- 1 x USB Cable
- 1 x User Manual
2ml EU Edition
- 1 x RPM80 Pro Device
- 1 x RPM80 RPM Pod ( RPM Mesh 0.4ohm Coil Pre-installed) (2ml)
- 1 x RPM80 RGC Pod (RGC Conical Mesh 0.17ohm coil powered by nexmesh Pre-installed) (2ml)
- 1 x cable
- 1 x User Manual
Simple packing. Customary packing from the factory, the packing is subject to change without notice.
Order Tips:
- No e-juice. You shall purchase it separately.
- You can buy SMOK RPM Lite Pod in Buyecigkits.
Guarantee:
Please review our guarantee policy.
Payment:
Warranty:
If you encounter any issues with your order, please contact us before opening a dispute. We will send you a free replacement after confirming the problem.
For a full refund, please return the item(s) to us in its original packaging and provide us with the shipping tracking number. Once we receive the package, we will issue a full refund.
Shipping from China:
Epacket: Delivery takes 15-25 days in the EU and USA, and 20-35 days in Russia.
Netherlands Post: Delivery takes about 20 days in the EU, 25-35 days in Asia, and approximately 60 days in South America or Africa.
Feedback:
We specialize in electronic cigarettes and e-hookah products, and our main goal is 100% customer satisfaction. Therefore, your feedback is crucial to us.
If you are satisfied with your purchase, please leave us a 5-star review. If you have any concerns, please contact us before leaving a review so we can address the issue promptly.
- Stock: In Stock
- Model: xworkr
- Weight: 3.00lb