Free Shipping
Ships Today
Capacity: 1500mah Size : 194 X 82 X 55MM Weight:349g Output Temperature: 450 F/500 F/600 F/680 F Surface Material: Metal + Silicone Key features 5 c..
Free Shipping
Ships Today
Easy
Returns
Lowest Price
Guarantee
Capacity: 1500mah
Size : 194 X 82 X 55MM
Weight:349g
Output Temperature: 450 F/500 F/600 F/680 F
Surface Material: Metal + Silicone
Key features
5 consecutive presses
Press to adjust the temperature
Double-click to warm up
Press 5 times to turn it off for 3 seconds
On/Off: Press For 3seconds
1500mah battery with better endurance
4 Unique Manual Heat Settings(450℉/500℉/550℉/600℉)
Support cut tobacco, e-liquid, and tobacco
20 Second Average Heat-Up Time
Micro-USB Fast Charging, Full Charge Time: About 2 Hours
Atomizer For Puff peak
The Device Has Low Voltage Protection, Short Circuit Protection And Overheating Protection
How to use:
STEP 1: Fully charge the device before first use. White lights pulse while charging, and turn off automatically when complete.(1 light: 0-25%; 2 lights: 25-50%; 3 lights: 50-75% ; 4 lights: 75-100%)
STEP 2: Fill glass with water just above the air-hole. Do not fill glass while attached to the base.
X- Do not allow water in the lower section!
STEP 3: Align the inlet hole on the front of the glass with the atomizer. Carefully place the glass into the base.
STEP 4: Hold the button for 3 seconds to turn on the device (same way to turn off the device). The white lights will flash once and the ambient lights will flash sequentially red>blue>green.
STEP 5: Single click to toggle through heat settings.
1 white light: 450℉ 2 white lights: 500℉
3 white lights: 550℉ 4 white lights: 600℉
The device will vibrate once while changing heat.
STEP 6: Use the Loading Tool to place contents on the bottom surface of the bowl [not the side].
STEP 7: Place the carb cap on top of the atomizer.
STEP 8: Double click to initiate heat-up [5 seconds avg. ], the device will vibrate twice and ambient lights will be red. Single-click the button to turn off the heat-up process at any time.
STEP 9: Ambient lights will turn green when ready. ( green lights will be on for 20 seconds, then heat up process automatically stop and ambient lights turn blue)
STEP 10: Use a cotton swab to clean the chamber after each use.
Packing:
A: Alcohol Pad
B: Micro-USB SuperCharger
C: Loading Tool
D: Glass Attachment
E: Atomizer
F: Base
G: Silicone Box
H: Carb Cap
I: Extra Bowl*2
It doesn't come with wax and dry herb. You need to buy it separately.
Please check the guarantee policy.
Please contact us first before you leave a review, we will help you to deal with your problem In time